Pride Of The Web –

What Can cause Embroidery Machine thread to break?

The machine isn’t correctly threaded; Re-threading the machine ensuring the thread has gone through every one of the guides and the tension properly to suit your embroidery design downloads

There may be burrs within the needle’s eye, on the thread guides, needle plate or the hook; Replace the needle and try buffing the thread guides and needle plate. Buffing may alter the timing, so it might be wise to replace a defective hook.

Dry Hook; As it gets dry fastermore quickly, the hook requires routine lubrication. The hook assembly must be oiled every 4-8 hours of machine running time.

Needle to smallsmaller; You may have to change to a larger needle

An excessive amount of Adhesive spray; You should be using exclusively Embroidery design adhesive sprays, never over use them. Excessive adhesive build up on the needle can make them drag and break threads. If this is occurring you should take a look at the way you use the adhesive spray

Incorrect timing; If a machine isn’t timed correctly, it can cause many problems along with thread breaks. For example, broken needles, poor stitching or at times no stitching.

Old Thread; Thread can become brittle with age and long contact with light, air as well as heat. You should keep your thread within a cool, dark place to prolong shelf life.

Bruised cone; A bruised cone of thread can happen if the thread falls on the floor, causing the lower winding of thread to undo and catch as the thread spools off. You can take off the affected section of the thread or switch the cone.

Machine speed; A few of theembroidery designs add to the stress on thread. You ought to lower the machine speed as required

Lint build up; A lint build up around the tension discs, needle plate or bobbin cases could cause breakage. These areas need to be cleaned regularly with air or possibly a brush.

Bent needle; This may happen after the needle hits a very hard object for instance a Hoop, needle plate or the hook. If this happensyou have to change the needle and search for burrs and also the timing.

Improper tensions; If your tension is too tight, you can get pulling, puckering and thread stress. If the thread is too loose you can get the thread to pile up and loop. You need to adapt the tensions to achieve a flat smooth look.

Using Tape for loose ends; Using tape can leave a residue which can cause friction and thread breakage.

Related posts:

1. Machine embroidery with metallic thread Metallic thread tends to be extremely frustrating to use, should...
2. The Snoopy Sno Cone Machine and A Really Awesome Eyepiece Having been into amateur astronomy for many years, I’ve had...
3. WML520P Washing Machine Discount Code Online Most people expect their washing machine to be big not...
4. How Successful is the Ab Lounge Machine? Every time a brand new item is introduced into the...
5. Jura Capresso Impressa J6: One Impressive Coffee Machine If you think a coffee maker cannot be useful and...